http://www.pic-upload.de/view-19691127/homi.jpg.html

virus

Awaiting approval here on esr :) Go people,post !

vertex 1, fps config in general, keel

16~ cm/360 on ps/2 for now(some smoothing going on, which im testing)
fov = fitting my monitor to be comfortable, 109.5 on 5:4 19"


BUT, why this again, don't we have enough already? or is this just another compulsion of yours?

imo you can never talk enough about cfgs ,its half the game for me ,one of the things keeping it alive after 10-15 years :)

i can see if someone found something amazing out, but for posting all the com_maxfps 125, cg_forceenemymodel keel, is just enough already imo.

On a side note, anyone know if overbrightbits has changed with graphic card drivers over the years, or is it just not possible(too bright) to use with vertex light and has always been like that??

brightness is an issue in ql, maps differ a lot. i use a brightness-script 0.9-1.2 and also a toggle for vertexlight. need both.


//***** BRIGHTNESS SCRIPT *******

bind pgup "vstr ybl_bright_up"
bind pgdn "vstr ybl_bright_dn"
seta ybl_bright_up "vstr ybl_bright_120"
seta ybl_bright_dn "vstr ybl_bright_110"
seta ybl_bright_095 "r_gamma 0.95 ; set ybl_bright_up vstr ybl_bright_100 "
seta ybl_bright_100 "r_gamma 1.00 ; set ybl_bright_up vstr ybl_bright_105 ; set ybl_bright_dn vstr ybl_bright_095 "
seta ybl_bright_105 "r_gamma 1.05 ; set ybl_bright_up vstr ybl_bright_110 ; set ybl_bright_dn vstr ybl_bright_100 "
seta ybl_bright_110 "r_gamma 1.10 ; set ybl_bright_up vstr ybl_bright_115 ; set ybl_bright_dn vstr ybl_bright_105 "
seta ybl_bright_115 "r_gamma 1.15 ; set ybl_bright_up vstr ybl_bright_120 ; set ybl_bright_dn vstr ybl_bright_110 "
seta ybl_bright_120 "r_gamma 1.20 ; set ybl_bright_dn vstr ybl_bright_115 "



//***** VERTEX TOGGLE *****

bind F9 "vstr mapbright"
seta mapbright "toggle r_vertexlight ; vid_restart ; print vertexlight"

Overbrightbits 1 and Mapoverbrightbits 1 is imo the only way to play vertex 1 without mapoverbrightbitcaps involved. gamma 1,contrast 1 too

does overbrightbits 1 decrease map 'overbrightness'?

I use vertex (no ghey shadows), mapover 1, over 2 (default), brightcap 110 and r_gamma ~1.3

try r_mapoverbrightbits 8 r_mapoverbrightcap 145

overbright is blows the brightness when i use vertexlight, that's why i thought it could be driver issue, but use overbright 0 when using vertex.

overbright is very incosistent across various graphics cards or drivers. I'd suggest adapting a good non-overbright config.

It's harder to distinguish some details (like wall edges) due to compressed colours but you can get used to it with some gamma adjustments.

The main problem is blurry and dark crosshair.
I'm aware of 3 methods to overcome this problem:
1 Get used to it - definitely possible. You could increase intensity instead but this makes explosions/plasma opaque.
2. r_texturemode gl_nearest (or gl_nearest_mipmap_linear or gl_nearest_mipmap_nearest) - this is what I use.
3. "cypher's" visuals - high gamma and black crosshair. Burns my eyes on CRT :-)
4. I think well aligned custom crosshairs don't suffer from this.

edit: also you may want to set enemy colour to bright 0xFFFFFF instead of default (0xA0A0A0 I believe)

yeah, it's a long time ago i switched to overbright 0, mapover 1. But recently experimenting a little with mapover 8 and capping it. Only way to play cold war and other "white" maps with vertex.

http://i.imgur.com/sy4qR2b.jpg

use antialiasing

I don't care that much for AA and it hogs the system more, it's only noticeable when standing still and this game is not about standing still.

made a sniper-script, no longer use it ofc, but a bit funny

alias +ybl_sniper "sensitivity 1 "
alias -ybl_sniper "sensitivity 2 "

bind e "weapon 7 ; +ybl_sniper "

makes a lower sensi as long as u press the weapon-key

I tried something like that ;) I had lower fov when i pressed +fire with the lg.
Worked great untill i got up close and personal with fov 70 .... :P

yep, the game is just too fast for stuff like this.
i tried the same thing, even with zoomscaling to make it smooth -> doesnt work at all

http://i.imgur.com/oGR58LC.jpg

i like, give

http://bit.ly/12RCdWe

grazzie

http://postimg.org/image/5cxwj5x6l/

:D

lol

download?

I like how you blackened out your name in the scoreline 'Aco', but then you didn't black it out in the fragmessage.

when you're not, you're not

You know, he is not know for his "brainz".

top left

It keeps track of enemies outside the PVS?

probably:)

you're the one with the hacks, you tell me : -/

If there's some way to keep track client side of players outside the PVS it could be used to enhance other player POV in wolfcam.

i have no idea what u just said in this, or the previous post, i just replied smth out of courtesy, u being a nice fellow. but other player pov does suck in wolfcam true true

At least you are only ruining a game of insta XD

LOL, I actually thought wallhacks would really remove the walls or make them atleast kinda transparent, so that it would be kinda hard to move through the maps with them enabled.. but this looks like fuckin american military drone technology :D

A lot of peoples thinks that way, which is surprising considering youtube is more than enough to get an idea of how a wallhack works; some player's ignorance is also, partially, the reason to why so many pros and semi pros uses wallhacks in official matches impudently.

You still believe that Evil wallhacks in every FACEIT cup?

Atleast would suit his nickname! :]

damn

too much postprocess 0 in this thread.

Not a big deal imo. With 1 u can use contrast and with 0 you can use intensity and they are the same thing kinda. I dont see any other "big" differences atleast :P

No bloom with postprocess 0 I believe. Chics dig bloom.

Ye your right , still i imagine most people play without it :)

Let me see if I can reproduce it. The problem is that I have a crt, and so far I have not found settings that work without postprocess.

How is CRT relevant?
r_mapoverbrightbits 0
r_overbrightbits 0
r_vertexlightning 1
r_postprocess 0
r_picmip 5
r_simplemipmaps 1
r_intensity 1.2

looks ugly but crisp if done right.

I will try, thanks.

i forgot about r_gamma which i have over 2.0

r_enablePostProcess, not r_postprocess

r_fullbright "1" and r_vertexlight "0" looks kinda kewl if you dont mind bright textures

post your configs guys, come on!

Bleh fine.

http://pastebin.com/rfwnEVn4

DL: https://www.dropbox.com/s/kpz6hcn4h5zedmt/cfg61613.zip

http://img707.imageshack.us/img707/6163/o08.png

I don't use texturemode gl_nearest or gl_nearest_mipmap_anything. The crosshair is done with the hud. I have it show over the current crosshair so that I still have a crosshair when spectating, and that crosshair is fairly close (just slightly smaller due to round edges)

mouse3 is my voice key for now.

https://www.dropbox.com/s/dj378pyj2awz68d/rzd2013.rar
Screenshot inside :D

elaborate on your decision to use a black crosshair.

Works best to notice the amount of damage dealt with crosshairhitstyle 1: red: full hit; yellow: medium damage; grey: little damage.

Well i just tryed it out and i found myself confortable with it, so i decided to keep it :P
And btw with black xhair i don't have any kinda problem about map color.

I've got my config on 4sg.

http://www.4seasonsgaming.com/forums/viewtopic.php?p=80095#p80095

screen: http://i.imgur.com/k90pcGL.jpg
cfg: http://pastebin.com/yBd8KGr1

screenshot

can you share your hud?

<link deleted>

The HUD is really nice. It works really well with my cfg (as you need some commands to fully see why it's so good; cg_drawammowarning 0, moved cg_drawteamoverlay, cg_draw etc). Things like the normal 'x (rocket) y', quad damage/counter and powerups appear nicely too.

Less, but better.

http://i.imgur.com/Cub3rEZ.jpg
Not as bright as it looks, I have a dark crt.

do u have a download to this cfg

I have changed crosshair, and maybe a few other things. But be warned, it is not pretty. Lots of junk from other cfgs. http://pastebin.com/j67WpBzq
EDIT: and heres menu file http://pastebin.com/QdUEcXey

it is ok. I was just looking for gfx settings, it goes well with the cyan models and I wanted to see if it would work well on more maps with white models instead.

Does it look alright with white models?

it's "okay"

I thought it looked great with the cyan model, unfortunately it makes it kind of hard to tell who has quad damage. Is it possible to change power up glow color?

I am not aware of any way to change the color of powerup glow in quake live, sorry.

also, yes it does look great with the cyan models but I prefer white to them.

NP, was pretty sure you couldn't.

http://i.imgur.com/2rMtCqp.jpg

http://i.imgur.com/DM0rcjz.jpg

http://i.imgur.com/67sX71l.jpg
http://i.imgur.com/GgcwDmt.jpg

awesome CFG, has to be said

The cfg smells like ULBE !

Sens: 1, 3200 DPI

Everything else as default.

aren´t you that frustrated kid who got banned for being racist?

Screenshot: http://tryhardbrigade.com/mariano/screenshots/QuakeLiveConfig.jpg

Config: http://tryhardbrigade.com/mariano/configs/QuakeLive/autoexec.cfg

Main graphics settings (look very good on my old 120hz CRT):

r_gamma "1.3"
r_contrast "0.9"
r_picmip "7"
r_vertexlight "1"

r_overbrightbits "1"
r_mapoverbrightbits "1"
r_mapoverbrightcap "0"

r_enablePostProcess "1"
r_enableColorCorrect "1"
r_ignorehwgamma "0"
r_ambientScale "100"
r_lodbias "0"
r_lodscale "50"

And of course "bloom" effect for better enemy model visibility:

r_enablebloom "1"
r_BloomActive "1"
r_BloomBrightThreshold "0.500"
r_BloomSaturation "2.000"
r_BloomIntensity "0.700"
r_BloomSceneSaturation "1.000"
r_BloomSceneIntensity "1.000"

r_BloomBlurRadius "5"
r_BloomBlurFalloff "0.75"
r_BloomBlurScale "0"
r_BloomPasses "2"

i still have to thank you for the cfg you posted like, years ago. never seen such a clean one before, built mine upon yours. looks like i'll have to repeat the process again.
we also have similar sens/accel setups what a coincidence, shame you're a pole tho
=)

i think your shoes are safe :P

Hahaha. :D

DOWNLOAD
http://www.sendspace.com/file/v72rgz

CHANGELOG
now using 2300dpi @ 1000hz, sensitivity "1" ( = 16cm/360°)











come on guys ! Post your configs !

high sens almost, nice

http://goo.gl/a3DHm

Cfg's structure is copied from noctis ql config.

Download:
http://www.sendspace.com/file/isam7a

bttr zoom script for RG

http://pastebin.com/w9nxdptF

bttr colors hud
http://pastebin.com/HgPdxpm2

http://imgur.com/a/p7u9L
http://www.sendspace.com/file/85hv35

DOWNLOAD
http://www.sendspace.com/file/shrb36

CHANGELOG
- smaller simpleitems, no more bobbing
- 30cm/360°
- added cg_drawdead/hit friends time to their default values

DOWNLOAD
http://www.sendspace.com/file/cstjwv

CHANGELOG
- simpleItemsBob 2 (only the armors and MH are bobbing)
- now using 1150dpi@500hz; sensitivity 1.2 (29cm/360°)

DOWNLOAD
http://www.sendspace.com/file/9qdytu

CHANGELOG
- revert back to sensitivity 2.8 (30cm/360°) @ 450dpi

Abyssus?

Zowie FK