Hey guys,

I wanted to put G400 sensor into my WMO 1.1A Black Case,

I worked on it like two days. During this process, the god of this job, Spicke, helped me in every moment, thanks to him so much! <3


1-) Cleaned WMO case for G400 sensor : http://puu.sh/5NJ8v.jpg
2-) Unsoldered G400 sensor part from click part, and unsoldered wmo's click part.
3-) Found buttons one by one and solder them together with cables.

Everything was ok, no doubt it was about to work...

I was so excited so I rushed a bit,

Mistakenly, I plugged the USB power cable to G400's side buttons plug. You can see both plugs in picture. And that part heated so much, I think I burned it. M1-M2-M3 don't work, sensor works, scroll up and down works.

http://puu.sh/5NFDK.jpg

I had a White WMO 1.1A in 2011 and buttons were broken, the case I mean, so I cut the case and saved the sensor until now. Now I thought about placing it to my black case but I cleaned inside of WMO as you can see in first picture. So I soldered the optical transparent plastic thing to black case, there wasn't any screw hole anymore so I made it stable with some napkin pressure from top of it, and guess what, it is working pretty fine so far. I had crosshair falling down problem with my black wmo, now with this white sensor, that problem went away. But yeah, it costed a g400. :P

Now my Black WMO works with a White WMO heart.

And R.I.P. G400 :(

Yeah thats pretty much it, end of my g400-wmo story.

MORAL OF THE STORY : DON'T FUCKING RUSH DOING THESE KIND OF STUFF!