If you are going to keep the greyscale then you should make the enemy and team models different colours. At the moment they're both blue and it looks kind of weird. They both stand out so much, but not enough from each other.

I don't know if Wolfcam bloom has the same settings that QL, but if it does you should look for the one that controls bloom blur radius and lower it. You can keep the popping effects without the fuzzy undefined edges at anything other than close range. It's the only thing that makes bloom usable for playing cfgs, but it's also a setting that lots of people overlook in their eyecandy setups.

I'm disappointed in all honesty

I would advise against using r_mapgreyscale. Yes, it's distinctive but not really in a good way. It's a cheap trick, and it feels like you're just changing it for the sake of having a gimmick. But more individuality in movie making is a good thing, so I hope you are able to come up with something different =)

From memory, the cvar you're looking for is cg_drawcenterprintscale. Try increasing it.

Personally I don't like bob or stuff like screen damage; but I feel all of this should be up to you to decide ;)

Movie in the pipeline?

Thx for the feedback. Yeah I'm working on something, it's been a while since I last made a video.

personally i like this for cfg but no for videos , aniway u alwais can play a lot with r_map grey scale , r_bloom and r_lightmap color here , try some examples and im sure u find u want , good luck

///////////////////////////////////////////////////////////////////////////////////////////////////////////////
R_
///////////////////////////////////////////////////////////////////////////////////////////////////////////////

r_allowExtensions : Global enabling of all OpenGL extensions.
r_allowResize : Allows resizing of the game by dragging the edge of the game window. Automatically does a vid_restart when you let go of the edge.
r_allowSoftwareGL : Enables the use of the default OpenGL drivers provided by the operating system.
r_ambientScale : Controls the amount of ambient light cast among players.
r_anaglyph2d : Enable/disable color splitting for 2D HUD objects when using anaglyph rendering.
r_anaglyphMode : Enables anaglyph rendering, for 3D effects.
r_availableModes : Sets the resolutions for each r_mode value (ex: 1024x768 1280x1024 would make r_mode 1 1024x768 and r_mode 2 1280x1024)
r_bloomBlurFalloff : ???
r_bloomBlurRadius : ???
r_bloomBlurScale : ???
r_bloomBrightThreshold : Sets the bloom threshold.
r_bloomDebug : A debugging tool for bloom that shows each bloom pass inside a screen at the top left of the game window.
r_bloomIntensity : Sets the bloom intensity.
r_bloomPasses : Sets the number of rendering passes for bloom effect.
r_bloomSaturation : Sets the degree of color saturation applied to the bloom effect.
r_bloomSceneIntesnity : Sets the intensity of brightness applied to the non-bloomed world.
r_bloomSceneSaturation : Sets the degree of color saturation applied to the non-bloomed world.
r_bloomTextureScale : Sets the size of the screenshot that is used for post processing.
r_centerWindow : Allows automatic centering of the game window when you do a vid_restart (it centers the game window in your screen).
r_clear : Enables the clearing of the screen between video frames.
r_cloudHeight : ???
r_cloudHeightOrig : The original value of r_cloudheight.
r_colorbits : Sets video color depth
r_colorMipLevels : A developer aid to see texture mip usage.
r_colorSkinsFuzz : Controls how much of the model is covered by the color skin.
r_colorSkinsIntensity : Controls the brightness of color skins.
r_contrast : Sets the level of contrast.
r_customHeight : Sets the custom vertical resolution when r_mode -1
r_customPixelAspect : ???
r_customWidth : Sets the custom horizontal resolution when r_mode -1
r_darknessThreshold : Brighten darker areas on the map without heavily modifying the brighter areas.
r_debuglight : A debugging tool that writes ambient light data to console.
r_debugSort : A debugging tool that only renders those sort layers that are greater than the value of the variable set.
r_debugSurface : Debugging tool: shows bounding boxes of patch mesh surfaces that are targeted by the camera view.
r_debugSurfaceUpdate : When r_debugSurface is 1, this enables changing the patch mesh surface bounding box according to location.
r_depthbits : Sets Z-buffer depth
r_detailtextures : Enables the usage of detail texturing stages
r_directedScale : Sets the lighting intensity applied to world objects.
r_displayRefresh : Monitor refresh rate (in Hertz), useful for CRT monitors.
r_dlightBacks : Enables dynamic light compensation for darker or brighter areas.
r_drawBuffer : Sets which frame buffer to draw into. only GL_FRONT works, and that flashes the screen a bunch.
r_drawentities : Enables the drawing of world entities, such as rockets, players, ammo crates, items, explosions etc.
r_drawSkyFloor : Enables a visual fix of the glitchy scrolling sky floors, removing the 'hall of mirrors' effect
r_drawSun : Controls the way in which lighting of models and objects is handled by simulating effects of sunlight.
r_drawworld : Enables rendering of the map.
r_dynamiclight : Enables dynamic light from rockets etc. Fixed dynamiclights: 1, use original broken code: 2, debug: 3.
r_enableBloom : Enables light bloom effects when r_enablePostProcess 1.
r_enableColorCorrect : Enables color correction when r_enablePostProcess 1.
r_enablePostProcess : Enables post processing, which offers extra graphical features and quality.
r_ext_compiled_vertex_array : Enables hardware compiled vertex array rendering
r_ext_compressed_textures : Enables external texture compression
r_ext_max_anisotropy : Sets the maximum level of anisotropic filtering
r_ext_multisample : Activate OpenGL texture multisampling
r_ext_multitexture : Enables external hardware multi-texturing
r_ext_texture_env_add : Enables additive blending when using multi-texturing
r_ext_texture_filter_anisotropic : If enabled, external anisotropic filtering settings will be used
r_facePlaneCull : Enables culling of brush faces you can't see.
r_fastsky : Disable sky boxes and portal camera views
r_fastSkyColor : Sets the sky color when r_fastsky 1
r_fboAntiAlias : Enable AA when r_useFbo is set to 1
r_fboStencil : An extension to allow stencil shadowing with fbo
r_finish : Enables synchronization of rendered frames.
r_flareCoeff : Some flare thing.
r_flareFade : Sets fading scale of flares in relation to distance
r_flares : Enables projectile flare and lightning effects
r_flareSize : Sets size of flares.
r_forceMap : Forces a specific map to load instead of the one called for by the demo. This allows you to play different versions of the same map.
r_forceSky : Forces the sky to a specific shader. Allows manual overriding of skies, so you can switch skies from map to map.
r_fullbright : Renders all textures on the map at full brightness
r_fullscreen : Enables fullscreen view
r_gamma : Amount of image luminance applied to the in-game display.
r_greyscale : Enables greyscaling of everything
r_greyscaleValue : Sets how much color you want (higher = less color)
r_ignoreFastPath : Enables ignoring of Tess fast paths
r_ignoreGLErros : Enables ignoring of OpenGL errors in an attempt to continue rendering
r_ignorehwgamma : Enables ignoreing of hardware gamma settings
r_inGameVideo : Enables in-game videos.
r_intensity : Intensifies the level of brightness added to textures and model skins
r_jpegCompressionQuality : The quality of all JPEG outputs.
r_lightmap : Enables the light data lighting model.
r_lightmapColor : Changes the color of the light when r_lightmap 1.
r_lockpvs : Locks the Potentially Visible Set table, resulting in area visibilities not being rendered.
r_lodbias : Geometry level of detail
r_lodCurveError : Level of detail curve error setting
r_lodscale : Level of detail scale adjustment
r_logFile : Sets the number of frames to emit GL logs.
r_mapGreyScale : Enables greyscaling of map textures only
r_mapOverBrightBits : Ambient lighting and radiance of the map
r_mapOverBrightBitsCap : Sets how bright the map can get with r_mapOverBrightBits
r_mapOverBrightBitsValue : Sets the value of r_mapOverBrightBits. (r_mapOverBrightBits increases by powers of 2)
r_marksOnTriangleMeshes : Enables marks on triangle meshes, such as map objects.
r_maxpolys : Sets the maximum number of polygons drawn to the screen.
r_maxpolyverts : Maximum number of vertices from polygons drawn to screen.
r_measureOverdraw : Activate special rendering mode that visualizes the rendering cost per pixel by colour.
r_mode : Screen resolution setting. -1 enables r_customWidth and r_customHeight
r_nobind : Disables binding of textures to triangles.
r_noborder : Remove window decoration from window managers, like borders and titlebar.
r_nocull : Disables culling of textures you can't see. This greatly lowers framerate, with no positive effect.
r_nocurves : Disables rendering of curved surfaces.
r_noportals : Disables portal cameras.
r_norefresh : Disables rendering refreshes. Stops all rendering, removing the whole game world.
r_novis : Renders the whole map upon loading, not just what you see, when you see it.
r_offsetfactor : Sets the polygon offset factor for shader stages that have polygon offset set.
r_offsetunits : Sets the polygon offset units for shader stages that have polygon offset set.
r_overBrightBits : Ambient lighting applied to in-game entities or objects
r_overBrightBitsValue : Sets the value of r_overBrightBits. r_overBrightBits increases by powers of 2.
r_picmip : Texture color average/level of detail
r_picmipGreyScale : Same as r_greyScale but only apply when picmip is allowed
r_picmipGreyScaleValue : Sets how low r_picmip has to be for r_greyscale to take effect
r_portalBobbing : Enable the slow bobbing of portalcams.
r_portalOnly : A debug option to see exactly what is being mirrored when drawing portal surfaces.
r_primitives : Sets rendering method
r_printShaders : A debugging tool that prints out all the shaders that are utilised by a level
r_railCoreWidth : Rail trail core effect diameter.
r_railSegmentLength : Length of rail beam segments.
r_railWidth : Diameter of rail beam and impact effects.
r_roundImagesDown : Sets the amount to round images down by
r_saveFontData : Developer cvar to create that font images that get shipped with the game.
r_sdlDriver : Indicates the SDL driver backend being used.
r_showcluster : Displays clusters loaded by number.
r_showImages : A debugging tool that displays loaded textures on screen.
r_shownormals : Shows wireframe normals on model polygons and brush faces.
r_showsky : Forces sky in front of all surfaces.
r_showSmp : Shows Symmetric MultiProcessing information on the HUD.
r_showtris : Enables wireframe rendering of the world.
r_simpleMipMaps : Enables simple MIP mapping
r_singleShader : Set to 1 to use one shader for the whole map. For when you want to override all textures on a map with something else.
r_singleShaderName : The name of the shader to be used when r_singleshader is set to 1.
r_skipBackEnd : A debugging tool that skips the rendering of the back end.
r_smp : Enables symmetric multiprocessing acceleration
r_speeds : Shows rendering information display, providing useful information to developers (especially map designers) on rendering speeds.
r_stencilbits : Sets stencil buffer size
r_stereoEnabled : Enables stereo separation, for 3D effects
r_stereoSeparation : Control eye separation. Resulting separation is r_zProj divided by this value
r_subdivisions : Patch mesh/curve sub divisions
r_swapInterval : Forces vertical synchronization, used in combination with r_displayrefresh.
r_teleporterFlash : What to show while going through a teleporter. Show black screen: 0, show white screen: 1, don't refresh until through teleporter: 2.
r_texturebits : Sets the texture quality level
r_textureMode : Sets texture filter.
r_uiFullScreen : Sets the UI running fullscreen
r_useFbo : Framebuffer support. Adds more flexibility while captureing, and allows higher resolution to be displayed in the same window. (1080p in 720p window)
r_verbose : Lists occurring rendering commands in the console.
r_vertexLight : Enables vertex lighting
r_visibleWindow Width : The width of the visible window. Use r_customWidth to change the width that you will capture at
r_visibleWindowHeight : The height of the visible window. Use r_customHeight to change the height that you will capture at
r_znear : Sets distance from player in which objects are clipped out of the scene.
r_zproj : Distance of observer camera to projection plane

My config niiiice

I was preparing to post in kevlark thread. But am disappoint.

xD

Are you the real nip?

Yes.