What's the point if sens is changing every second update OpieOP

oh you didn't

Sens: 1.6
cm/360: around 40ish probably
Mouse dpi: 800
Fpv: 97.473894

https://www.youtube.com/watch?v=WSV-QlB6kU4&a...YPzh2Ze5U9

Sens: 1337
cm/360: around 1337
Mouse dpi: 1337
Fpv: 1337

Sens: best sens of all times wot you expect m8?

you must have downloaded my cfg

Sens 2.5
Dpi 880
19cm/360
fov 90
37% lg, 53% rail on average

ca-hero

Sens: 1.9 / m_yaw 0.022 / m_pitch 0.024
cm/360: 21.87
Mouse dpi: 1000
Fov: 102

g100s

sens 0.8
accel 0.01
cap 0
offset 0
dpi 1800
no drivers
fov 100
Zowie FK2A
hit tha vap pipe
=]

Sens 1.75
Fov 90
34 cm 360
Pitch yaw default
Ss rival
No gaycell
Off da railzzzz

Based on Anton's values from IEM Europe, then slightly modified:

sens: 2
yaw: 0.014
pitch: -0.018
mouseaccel: 0.25 (no Offset or other fancy crap)
dpi: 800
fov: 90
just a mouse

sensitivity: 1.4
cl_mouseaccel: 0.05
cl_mouseacceloffset: 5
cl_mousesenscap: 6
m_yaw: 0.02096
m_pitch: 0.0315
in_mouse: 2
m_cpi: 0
m_filter: 0

mouse: Ninox Aurora
driver: 1.2
FW: 1.2
cpi: 800
Hz: 500
Windows: 6 / 11
EPP: off + MarkC accelfix
cm/360: 39.1

fov: 95 (or 100 / 105)
r_mode: 5 (640 x 480)
r_displayrefresh: 75

Why even mentioning the firmware for this dead mouse? It's not like there are any different versions available. + There never will be. Don't even get your hopes up.


edit:

ok, to stay OT


switched from g100s@g303 internals to Abyssus 2014 (can't stand the g100 shape anymore)

sensitivity: 3.1

driver: 1.18
FW: can't remember but the firmware which fixed max tracking issues. Guess its the only firmware available
cpi: 900 (dunno with this mouse. It just works for me. Feels much better than driverless @ 1800)
Hz: 500
Windows: 6 / 11
EPP: off + MarkC accelfix
cm/360: not even sure. Maybe 14-17 cm. I moved to a different place etc. and didn't play much since the last 4 months.

fov: 100
Res: 1050p
r_displayrefresh: 120 hz

I'm using g100s and the shape is a bit annoying for me. How do you find the Abyssus 2014?

I have mixed feelings about it. At least it's "grippable" for me unlike the old abyssus or salmosa. Funny i'm ending up using a razer pad and razer mouse, even though i dislike razer. (/insert random logitech rant) But i'm not as much into gaming anymore anyways.

Why would I hope for anything? Both the mouse and the driver works flawlessly. Gonna use it until the PCB breaks in half.

Driver can work for weeks and then suddenly your aim feels off, without you knowing why. In the worst case scenario it breaks your max speeds completely. But i'm sure you're already aware of that.

No. It's just fine for months.

This is how it should be done:)

People not including polling rate(125/500/1000hz) for example arent giving you the real information. For example 0.14 accel on 500hz is the same as 0.07 accel on 1000hz. But I've never seen it mentioned in any accel thread which is weird.

ehm no!

rofl

1000 dpi

sens 0.6
accel 0.005
fov 103
1000 hz

q3 cpma with a modified q3e.

dpi 1000
fov 110

sensitivity ".3"
cl_mouseAccel "2.8"
cl_mouseaccelcap "2.5"
cl_mouseacceloffset "10"
cl_mouseaccelstyle "1"
m_yaw "0.022"
m_pitch "0.036"

sensitivity 1, m_yaw default, m_pitch default
23.1cm/360°
1800dpi 500hz
FOV 90

Bunch of mouse nerds. This is how real men set up.

g100s, 500 horsepower
Middle button setting
Sensitivity 2

400dpi
30cm/360
fov90
Im handicapped to use anything then sniper/rail with this setup tho

Ingame mouse sens: 1.5
Cm/360: 35
Mouse dpi: 800
Fov: 90

And you still suck on a banana tree.

Said v1ncent_vega.

Sens: 4.375 / m_yaw 0.018 / m_pitch 0.018
cm/360: 28.5(measured)
Mouse dpi: 400 1000hz
Fov: 95

g400s

edit... and for 2016

sens 3
accel 0.17
yaw/pitch 0.021
senscap 6

Share your fov sens stuff in 2016 pls!

sensitivity 38
m_cpi 1800
cg_fov 100

Ninox Aurora Prototype

Umm?

EDIT: Didn't notice u wrote m_cpi instead of just cpi. That explains sens 38.

how many cm/360 is sensi 38 with m_cpi 1800 ?

38 ;)

Oh, you're right. Lmao. I didn't notice Sync wrote m_cpi instead of CPI. I was hella confused. I was like "You can't play with sens 38 at 1800 CPI!".

If stinkerror's sensitivity value is 38 while having m_cpi correctly adjusted, then he actually has less than 9.5 cm/360.
Which would be a pretty good explanation why ql's rl is an overpowered noobtube, while the lg got nerfed to shit.

He's not. Would raising the /sensitivity raise the amount of CM's for a 360? :D

If m_cpi is set to your mouse dpi value, then sens value becomes cm/360. ;)

Wrong. Go try it out :) Sens 10 will always give you about 35cm/360

CPI = Counts per inch.

Therefore sensitivity equals how many counts you will do per inch, sens 10 is ~35cm/360

edit: sync might have lowered his m_yaw and m_pitch values because I can't imagine he can play properly at all with a sens that high.

My bad, correct:

"After that, sensitivity changes from a dimensionless multiplier, to degrees per centimeter, and cl_MouseAccelOffset changes from counts per millisecond to centimeters per second."

Yeah thats it! Sensitivty = Degrees per centimeter :)

edit: calculator here https://docs.zoho.com/sheet/published.do?rid=...mode=embed

Unfortunately, I can totally imagine stinkerror going full retard at less than 9.5[cm/360] in NA-lolca with an overpowered noobtube, while kamikaze-rushing nerfed lg-players.

Sens 0.5/ 20.5cm
Dpi 4000
Razer lachesis 3G
Fov 103

Sens 4.5
23 cm/360
DPI 400
SS Kana v2
1000hz
Fov 93

Sens 2
Accel 0.14
Dpi 450
Steelseries Rival

Lowsens for life

Sens: 1.2
cm/360: 50>X>45
Mouse dpi: 800
Fov: 125

uhhh
kana v2 sensor inside kinzu shell (i call her the kinzana)
dpi 400
sens 4
accel 0.1
yaw 22
pitch 24
angle snapping at 10 degrees
oh and fov 103

Kanzu :D

CPI: 1050 (1250 on xornet II)
CM/360: 24
Accel: 0
Pitch and Yaw: 0.022
Fov: 96

Any sensitivity/in_mouse/m_yaw/etc number feels like complete garbage since the Steam exclusive update.

It's been fairly consistent for me, servers though, not so much.

Just got a new mouse, and after some testing i'v landed on the following settings.

zowie ec2-a: 800 dpi
sensitivity: 1.69
acceleration: 0.022
m_yaw & m_pitch: 0.018
fov: 93